Summit Yachts - Boat Sales International

HULL AND DECK

Vinylester vacuum consolidated composite sandwich hull and deck construction.
CoreCell linear SAN foam core laminate with biaxial and uni-directional E-glass fabrics with high density core blocking of glass-filled urethane.
Full compliance with European RCD (CE), including ISO 12217-2 Category A certification.
750kg SG Iron (80-55-06) keel fin with 2500kg antimony/lead bulb (approximate).
Gelcoat hull and deck finish.
Bonded hull to deck joint with flush mount Rails, Stanchions & hardware, molded toe rail to ORC requirements.
Composite structural bulkheads bonded to hull and deck.
Composite structural IGU forms base for interior structure, engine bed, etc.
Fabricated Anodized Aluminium Keel structural frame and mast step.
Recessed hatch garage. Life raft locker in cockpit
Molded propane locker, vented into cockpit.

PROPULSION AND STEERING

Yanmar 3JH4CE x SD50 39 hp 3 cylinder, diesel engine with saildrive, fresh water cooling, fuel filter & 110 amp alternator.
Molded composite engine surround with 25mm engine insulation for optimum sound-proofing.
Yanmar Type C recessed engine instrument panel.
Morse-type manual gearshift and throttle.
120 litre fuel tank with inspection/clean-out port.
Bri-Ski 420 x 340 (approximate) folding prop or similar.
Balanced spade rudder with custom carbon fiber stock and self-aligning roller bearings.
Twin alloy race wheels, mounted on custom composite pedestals.

PLUMBING

DECK HARDWARE

Two Harken* 48.2 2 speed primary winches
Two Harken* 44.2 STR 2 speed mainsheet winches.
Two Harken* 44.2 STR 2 speed secondary winches 1 - double lock-in 10" winch handle / 3 single lock-in 10" handles.
Mesh line bags with integral winch handle holder.
Harken deck hardware as shown on deck plan.
Underdeck mainsheet lead aft p&s.
Spinlock Rope Clutches and stoppers.
Stainless double rail open bow pulpit and stern rail.
Stainless steel tapered lifeline stanchions, aft 2 pairs with support legs.
Three flush mount mooring cleats.
Round foredeck hatch, Lewmar size 22.
Two Lewmar Size 20 articulated tinted acrylic hatches.
Two Lewmar Size 3 opening ports.
Lexan companionway sliding hatch offshore weather boards with inside/outside opening, lockable hasp.

SPARS AND RIGGING

Carbon Mast by King Composites – 2 pairs swept aluminium spreaders / no runners
Aluminum boom with welded end fittings, 8:1 internal outhaul, mainsail reef clutches and sheaves, mainsheet bail and mechanical Vang lug.
Discontinuous s/s rod rigging.
Double masthead spinnaker halyard sheave.
Double genoa halyard exit sheaves at hounds.
Two spectra genoa halyards Tylaska T-8 Shackles
Two spectra spinnaker halyards Tylaska T-8 Shackles.
Main halyard, spectra, 2:1 with SS captive pin shackle.
Mainsheet – 10 mm spectra.
Traveler control lines Dacron braid.
Custom carbon-fiber spinnaker pole & gear by King Composites
Two spectra spinnaker sheets / two Spec Set II afterguys Tylaska T-8 shackles
Two spectra genoa sheets Equiplite 10-6 connectors.
Ronstan Magic Wheel backstay adjuster
Solid Mechanical Vang.
Custom SS chainplates and backstay tang.
Two jib inhauls
Two mainsail clew reef lines.

ELECTRICAL

GALLEY

INTERIOR

Doorway forward into the forward stateroom, with an enclosed head to starboard, and a large bureau and hanging locker to port. The large double V-berth has sail storage underneath forward and duffel storage aft. Large fore hatch.
Enclosed head with mirrors, storage outboard, dual purpose shower/sink spigot, and door. Head Compartment is a composite molding with integral shower sump for easy cleaning and draining. Overhead hatch.
Finish is off-white with wood trim on vertical surfaces and bulkheads; lightweight bunk tops with white finish; wood drawer and cabinet trim.
Vinyl covered overhead and hull sides in forward and aft cabins.
Molded composite overhead in main cabin.
Choice of designer cushion fabrics or heavy-duty, water-resistant Sunbrella Acrylic fabric.
Main cabin settee berths with split backrest cushions port and starboard. Seatback hinges up to form pilot berth.
Lightweight composite drop-leaf table with wood trim fitting over stainless steel support rail for easy removal.
Large, sit-down, forward facing 1.0 x .6m (39” x 24”) nav table with chart storage, overhead instrument panel and outboard bookshelf.
Port and Starboard grab rails in main cabin.
Double quarter berth to port, single quarter berth to starboard.

FACTORY FITTED OPTIONS

Exterior Group

Custom Hull Color in Awlgrip to owner’s choice includes single contrasting boot stripe
Custom boot stripe(s)
Custom Hull Graphics
Bottom paint, sprayed & sanded to 400 grit race finish
Deck non-skid in contrasting color (light gray/white or sand/white)
Swim ladder – stainless steel – removable
Teak cockpit seats and sole – vacuum applied
Cradle for keel on or keel off storage & transportation

Deck Hardware

Rig

Electrical/Mechanical/Plumbing

Offshore Charging System
- Third battery, Group 27 isolated from house batteries
- Emergency solenoid switch for engine start
110 or 220 VAC shorepower system to USA or Euro specifications
Battery Inverter/Converter (must have 110 vac option)
12 VDC outlets (price each)
12 VDC refrigeration system (Offshore Charging System recommended)
Cockpit shower, hot & cold, recessed panel
Install owner supplied thru hulls (price each)

Interior

Commissioning